ANDO AQ-6310B REPAIR and CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANDO AQ-6310B. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Spectrum Analyzer, OSA?
Shop for Comparable Products on our
 used Optical Spectrum Analyzer, OSA page or new Optical Spectrum Analyzer, OSA page

As an alternative New Ridge Technologies offers the NRT-8000, the world’s Smallest Optical Spectrum Analyzer with built in “live wavelength calibration” for C-Band applications.  More
   ANDO AQ-6310B (AQ6310B)   Description / Specification:    
ANDO AQ-6310B 400 to 1750 nm  Optical Spectrum Analyzer

The Ando AQ-6310B is a general-purpose wavelength characteristic measuring instrument. It measures not only the LD, LED, and other light source spectrums, but also the loss wavelength and transmission characteristics of optical fiber cables, filters, and other devices. The AQ-6310B has a wide wavelength measurement range of 400 to 1750 nm, a high sensitivity to permit measurement of light as weak as -70 dBm, a wavelength resolution of ± 1 nm, and a high sweep rate, thereby covering a wide scope of applications. In addition to the basic functions such as the center wavelength, sweep width, resolution, and reference level setup functions, the AQ-6310B performs various other functions including the averaging, data memory, data subtraction, marker, peak search, half-width search, label, normalize, dominant, and 3-D display functions. Specifications. Measurement wavelength range: 400 to 1750 nm. Measurement level range: -80 to + 10 dBm/resolution (600 to 1600 nm) -70 to + 10 dBm/resolution (400 to 1750 nm). Linearity: + 1 dB / 60 dB, + 0.5 dB / 20 dB, ±0.2 dB / 10 dB. Level scale: 0.2 to 10 dB/div and LINEAR. Wavelength accuracy: ± 1 nm (5° to 40°C), ± 0.5 nm (25°C). Wavelength sweep width: 0.0 to 150 nm/div. Resolution: 0.1 to 10 nm (540 to 1750 nm), 0.1 to 5 nm (400 to 540 nm). Sweep time: 1 sec or less (span: 100 nm or less).



 

Standard Calibration $455.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ-6310B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: