ANDO AQ-6315A REPAIR and CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANDO AQ-6315A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Spectrum Analyzer, OSA?
Shop for Comparable Products on our
 used Optical Spectrum Analyzer, OSA page or new Optical Spectrum Analyzer, OSA page

As an alternative New Ridge Technologies offers the NRT-8000, the world’s Smallest Optical Spectrum Analyzer with built in “live wavelength calibration” for C-Band applications.  More
   ANDO AQ-6315A (AQ6315A)   Description / Specification:   Spec Sheet 
ANDO AQ-6315A 350 to 1750 nm Optical Spectrum Analyzer

The Ando AQ-6315A optical spectrum analyzer brings advanced capabilities to a wide range of applications, from light source evaluation to measurement of loss wavelength characteristics in optical devices. Features. The monochromator mode can be set to single-pass or double-pass to match your measurement application needs. Provides a dynamic range (stray light level) of 70dB or more ± 1 nm from the peak. This is especially valuable when measuring DFB-LD side-mode suppression ratio. Covers from 350nm to 1750nm and noise level has been suppressed to allows the AQ-6315A to measure light at down to -90dBm. Polarization dependency has been slashed to ± 0.05dB, enabling accurate measurement of optical amplifier gain and other critical measurements. 9.4-inch color LCD. Specifications. Measurement wavelength range: 350 to 1750 nm. Wavelength span: 0 to 1500 nm. Wavelength accuracy: ±0.5nm (25 ±5°C, 10/125 SM fiber). Wavelength reproducibility: ± 0.005nm (1 minute). Wavelength resolution: 0.05 to 10 nm. Level accuracy: ± 0.3dB (at 633/1310/1550nm). Interface GP-IB.



 

Standard Calibration $455.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ-6315A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.


I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: