Custom-Cal has a high success rate in the repair of the ANDO AQ-7110C. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

   ANDO AQ-7110C (AQ7110C)   Description / Specification:    
ANDO AQ-7110C Optical Fiber Analyzer

The Ando AQ-7110C Optical Fiber Analyzer is a compact OTDR designed to measure various types of fiber attenuations (transmission loss, connector loss, loss per unit length, etc.) and to efficiently locate breakpoints in the optical fibers. The AQ-7110C is particularly convenient for field operations for installation and maintenance of optical fibers. The AQ-7110C launches a light pulse into the optical fiber, then detects the backscattered light and measures the power level. This technique, called the backscattered light technique, enables the AQ-7110C to detect and locate breakpoints regardless of surrounding conditions. Features. Wide dynamic range: maximum 30dB (backscattered light). Maximum of 112 waveforms (2k data) on the CRT can be stored in a memory module (factory option). Horizontal axis scale: 125m, 250m, 0.5km, 1km, 2km, plus distance ranges specified for each plug-in optical unit GPIB interface for remote control is standard equipment.


Standard Calibration $295.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ-7110C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: