A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 1652 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

   BK PRECISION 1652   Description / Specification:   Spec Sheet 
BK PRECISION 1652 Triple Output DC Power Supply

The B+K Precision 1652A is a Triple Output DC Power Supply with two variable 0 to 24 VDC outputs capable of supplying 0 to 500 mA, and one fixed 5 VDC output capable of supplying up to 4 A. Connect outputs in series for higher voltage or connect in parallel for higher current output (switch selectable). Voltage and current metering is provided by two, three-digit LED displays. This unit is fully protected against short circuit, overload, and reverse polarity. Specifications. Number of Outputs: Three (1 variable, 2 fixed). Output Voltage: 0 to 24 VDC (A & B), 5 VDC (C). Output Current: 0 to 500 mA (A & B), 4 A (C). Constant Voltage Operation Line Regulation: < 0.01% + 3 mV (main), < 5 mV for line fixed supply. Constant Voltage Operation Load Regulation: < 0.01% + 3 mV (main), < 10 mV fixed. CV Recovery time: 100 µS. CV Ripple & Noise (5 Hz to 1 MHz): <2 mVrms (<= 5 mVrms for fixed output). Constant Current (CC) Adjustable Current Range: 5% to 100%. CC Line Regulation: < 0.2% + 6 mA. CC Load Regulation: < 0.2% + 3 µA. CC Current Ripple: < 3 mA rms. Display: dual 3-digit LED. Voltmeter Accuracy: +(0.5% rdg + 2 digits). Ammeter Accuracy: +(0.5% rdg + 2 digits). Overload Protection: Current limiting, Reverse polarity, Overvoltage, Short circuit.


Standard Calibration $130.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 1652. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your BK PRECISION 1652 CALIBRATION and/or BK PRECISION 1652 Triple Output DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: