BK PRECISION 2630 CALIBRATION and BK PRECISION 2630 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 2630 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   BK PRECISION 2630   Description / Specification:    
BK PRECISION 2630 1.05 GHz Spectrum Analyzer w/Tracking Generator

The B+K Precision 2630 1.05 GHz Spectrum Analyzer w/Tracking Generator is used by professionals in the cable TV industry as well as in the telecommunication field. It is a value packed service tool for signals up to 1.05GHz. Model 2630 is suitable for pre-compliance testing during development prior to third party testing. An optional near-field sniffer probe set (PR 261) can be used to locate cable and PC board emission “hot spots” and evaluate EMC problems at the breadboard and prototype level. The spectrum analyzer/sniffer probe combination is an excellent solution for RF leakage/radiation investigation, CATV/MATV system troubleshooting, cellular telephone/pocket pager test and EMI diagnostics. Specifications. Frequency: 1.05 GHz (1050 MHz). Frequency range: 0.15 MHz to 1.05 GHz (1050 MHz) (-3 dB). Center frequency display accuracy: ±100 kHz. Marker accuracy: ±(0.1% span + 100 kHz). Frequency display resolution: 100 kHz (4 digit LED). Frequency scanwidth: 100 kHz/div to 100 MHz/div in 1-2-5 steps and 0 Hz/div (Zero Scan). Frequency scanwidth: accuracy ±10%. Frequency stability Drift: <150 kHz/hour. IF Bandwidth (-3dB) Resolution: 800 kHz and 20 kHz. Video-Filter on: 4 kHz. Sweep rate: 43 Hz. Amplitude range: -100 dBm to +13 dBm. Screen display range: 80 dB (10 dB/div.). Reference level: -27 dBm to +13 dBm (in 10 dB steps). Reference level accuracy: ±2 dB. Average noise level: -99 dBm (12.5 kHz BW). Second and third harmonic: <-75 dBc. Input impedance: 50 ohm. Tracking Generator Output level range: -50 dBm to +1 dBm (in 10 dB steps and var.). Output attenuator: 0 to 40 dB (4 x 10 dB steps). Output attenuator accuracy: ±1 dB. Display: CRT 6 inch, 8 x 10 div. internal graticule.



 

Standard Calibration $375.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 2630. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.


Please contact us for your BK PRECISION 2630 CALIBRATION and/or BK PRECISION 2630 1.05 GHz Spectrum Analyzer w/Tracking Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: