BK PRECISION 3001 CALIBRATION and BK PRECISION 3001 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 3001 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   BK PRECISION 3001   Description / Specification:   Spec Sheet 
BK PRECISION 3001 150 kHz Handheld Sine/Square Wave Audio Generator

The B+K Precision 3001 150 kHz Handheld Sine/Square Wave Audio Generator, 20 Hz to 150 kHz in 46 steps. It has a low distortion R-C oscillator and variable output control. Specifications. Frequency Range: x1 range 20 Hz to 1.5 kHz (23 steps), x100 range 2 kHz to 150 kHz (23 steps). Accuracy: 20 Hz through 100 kHz (±3% or less), 120 kHz and 150 kHz (±5% or less). Output Control: 0dB/-20dB attenuator switch and variable amplitude control. Output impedance: approx. 600 ohm. Sinewave Output Voltage: >1.2V rms at max. setting (no load). Sinewave Output Flatness: (Short term) 20 Hz to 150 kHz ±0.5dB ( reference frequency 1 kHz). Sinewave Distortion: 200 Hz—15kHz 0.5% (THD) or less, 50 Hz—28 kHz 0.1% (THD) or less, 20 Hz—100kHz 0.3% (THD) or less. Square Wave Output Voltage: > 5V p-p at maximum setting. Square Wave Rise and Fall Time: Less than 0.5 microseconds. Square Wave Sag: Less than 5% at 20 Hz (DC coupled). Square Wave Over Shoot: <2% from maximum output, to 50mV p-p. Square Wave Duty Ratio: 50% +5%. Sync Output Voltage: >1.2V rms (no load). Sync Output Impedance: 1 k-ohm +5%.



 

Standard Calibration $135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 3001. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your BK PRECISION 3001 CALIBRATION and/or BK PRECISION 3001 150 kHz Handheld Sine/Square Wave Audio Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: