BURLEIGH WA-7100 REPAIR and BURLEIGH WA-7100 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the BURLEIGH WA-7100. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BURLEIGH WA-7100 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Wavelength Meter?
Shop for Comparable Products on our
 used Wavelength Meter page

 
   BURLEIGH WA-7100 (WA7100)   Description / Specification:    
BURLEIGH WA-7100 Optical Channel Analyzer

Burleigh WA-7100 Optical Channel Analyzer uses Michelson interferometer-based WAVEMETER technology to determine the absolute wavelength of an optical signal under test by comparing its interference fringe pattern with that of a built-in HeNe laser wavelength standard. Wavelength Range: 1270 to 1680 nm (178 to 236 THz). Wavelength Absolute accuracy (3 sigma): ± 1.5 pm. Wavelength Minimum resolvable separation: 30 pm. Wavelength Display resolution: 0.001 nm. Power Absolute accuracy (2 sigma): ± 0.5 dB (at ± 30 nm from 1310 and 1550 nm). Power Linearity: ± 0.3 dB. Power Display resolution: 0.01 dB. Optical Input Signal Sensitivity, single line input: -40 dBm (0.1 µW), 1270 - 1600 nm; -30 dBm (1.0 µW), 1600 - 1680 nm. Maximum input level (sum of all lines): + 10 dBm (10 mW). Optical Dynamic Range Signal-to noise ratio (lines above -25 dBm): > 35 dB, channel spacing = 100 GHz; > 27 dB, channel spacing = 50 GHz. Number of Laser Lines Input: Maximum 256. Measurement Cycle Time: 1.25 s (0.8 measurements/s). Instrument interface: GPIB (IEEE-488.2), RS-232, floppy disk drive, VGA monitor port, parallel printer port.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BURLEIGH WA-7100. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Coherence Length
Average distance over which superimposed waves lose their phase relationships

Linewidth
Linewidth is the width of a spectral line in terms of wavelength, wave number and frequency.

Power Flatness Versus Wavelength
When changing the wavelength at constant power setting and recording the differences between actual and displayed power levels, the power flatness is ± half the span (in dB) between the maximum and the minimum of the measured power levels.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


Please contact us for your BURLEIGH WA-7100 REPAIR and/or BURLEIGH WA-7100 Optical Channel Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: