DATRON 4707 REPAIR and DATRON 4707 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the DATRON 4707. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the DATRON 4707 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our
 used Calibrator page

 
   DATRON 4707   Description / Specification:    
DATRON 4707 Autocal Multifunction Standard

Datron 4707 Autocal Multifunction Standard. DC Voltage; Ranges: 100 uV to 1000V in decades. Full scale: 2 x range except 1000V range, where max output 1100V. Resolution: 1 digit in 19,999,999 or 10 nV, whichever is greater. Sensing: Selectable remote/ local sensing on 1 V to 1000V ranges. Guarding: Selectable remote/ local guarding. Settling Time: <1 s to 10 ppm of step size. Output Impedance/Max Output Current: 100 uV to 100 mV Ranges: 100 ohm. 1 V to 1000V Ranges: 25 mA max. AC Voltage Ranges: 1 mV to 1000V in decades. Full Scale: 2 x range except 1000V range, where max output 1100V. Resolution: 1 digit in 1,999 ,999 or 100 nV, whichever is greater. Frequency: Ranges: 100Hz to 1MHz in decade steps. Resolution: 1 % of range. Accuracy < ±100ppm. Sensing: Selectable remote/ local sensing on 1 V to 1000V ranges. Guarding: Selectable remote/ local guarding. Maximum Capacitive load: 1000 pF on 1V to 100V ranges, 300 pF on 1000V range. DC Current (Opt 27); Ranges: 100 uA to 1 A in decades. Full scale: 2 x range. Resolution: 1 digit in 1,999,999 or 100 pA, whichever is greater. Guarding: Selectable remote/ local guarding. AC Current; Ranges: 100 uA to 1 A in decades. Full scale: 2 x range. Resolution: 1 digit in 1,999,999 or 100 pA, whichever is greater. Guarding: Selectable remote/ local guarding. Resistance (Opt 27); Ranges: 10 ohm to 100M-ohm in decades. (Ranges are nominal, actual calibrated values are displayed). Connections: Selectable 2 or 4-wire, remote/local guard. Display Resolution: 1 digit in 19,999,999. Calibration: Autocal from front panel or via the IEEE-488 interface. OPTIONS; 17: 1000V Ranges, DCV and ACV. 27: DCI, ACI and ohm .



 

Standard Cal with Data $1,125.00 *
*This is a Web introductory price for one calibration of the DATRON 4707. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your DATRON 4707 REPAIR and/or DATRON 4707 Autocal Multifunction Standard CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: