A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 73 III Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   FLUKE 73 III (73-III)   Description / Specification:    
FLUKE 73 III Handheld Digital Multimeter

The Fluke 73-III Digital Multimeter represents one of the best selling multimeter designs of all time. It’s classic simplicity combined with attractive feature set make this meter the perfect choice for electronic and automotive applications. The 73-III features include: Default Autorange mode that's easy to change to manual by simply touching the RANGE button. Large, high contrast, easy-to-read digital display with an analog bar graph. Automatic Touch-Hold automatically triggers the meter to capture stable non-zero readings freeing you to focus on the test probes. Meets IEC 1010 safety standards for 600 V CAT II. Protected from overvoltage transients to 4 kV per IEC 1010-1. Specifications. Maximum V dc: 600 V. Basic accuracy V dc: 0.3%. Maximum resolution V dc: 0.1 mV. Maximum V ac: 600 V. Basic accuracy V ac: 2%. Maximum resolution V ac: 1 mV. Maximum DC and AC current: 10 A continuous. Maximum resolution DC and AC current: 0.01 mA. Maximum Resistance: 32 M-ohm. Basic accuracy Resistance: 0.5%. Maximum resolution Resistance: 0.1 ohm.


Standard Calibration $60.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 73 III. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your FLUKE 73 III CALIBRATION and/or FLUKE 73 III Handheld Digital Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: