FLUKE 87 III CALIBRATION and FLUKE 87 III REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 87 III Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

 
   FLUKE 87 III (87III)   Description / Specification:    
FLUKE 87 III Handheld True RMS Digital Multimeter

The Fluke 87 III 4000-count DMM provides 11 functions for electronic and industrial applications, including high performance dc/ac voltage and current measurement, frequency, duty cycle, resistance, conductance, and capacitance measurement. It is EMI shielded and comes with a splash-proof and dust-proof case. A protective holster enables safe use under harsh operating conditions. Features. Min/Max/Average recording mode with Min/Max AlertTM; stores the highest, lowest and 36-hour average of all readings, allowing signal monitoring for seconds or days. Min/Max Alert gives an audible tone for readings above or below previous minimums or maximums. Frequency, duty cycle and capacitance measurements. 1000V rms input protection; Input Alert provides an audible warning if the test leads are in current, but the function switch is not. This reduces the risk of damage to the equipment being tested and to the meter. Provides 1000 volt rms input protection in both ohms and diode test. 3%-digit, 4000 count display updates 4 times per second, analog display updates 40 times per second. 4.5-digit mode, 19 999 counts and True-rms ac voltage and current. Ranges. VDC: 400 mV - 1000V. VAC (1 kHz to 2.5 kHz.): 400 mV - 1000V. mADC: 40.00 mA - 10.00 A. mAAC (45 Hz to 2 kHz): 40.00 mA - 10.00 A. µADC: 400.0 µA - 4000 µA. µAAC (45 Hz to 2 kHz): 400.0 µA - 4000 µA. Resistance: 400 ohm - 40 M-ohm. Conductance: 40 nS. Capacitance: 5.00 nF- 5.00 uF. Frequency (0.5 Hz to 200 kHz, pulse width >2 µs): 199.99 Hz -199.99 kHz.



 

Standard Calibration $60.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 87 III. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your FLUKE 87 III CALIBRATION and/or FLUKE 87 III Handheld True RMS Digital Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: