|
Lightwave Multimeter Mainframe can be set up as a single or dual channel power meters, single or dual wavelength fixed or tunable sources and loss test sets. Display resolution: 0.0001 dB/dBm, 0.01 pW to 10pW (depending on power range) , up to 6 1/2 digits (user definable). GPIB Interface Performance: max. 300 kB/s (burst data rate during read of 12001 points from a power meter). Trigger: True synchronous on all channels. Number of modules: Two. Display: Graphical color display 300 × 240 points visible.
|
|
The UC Instruments GM8001B Lightwave Multimeter Display with Two Channels, can be configured as the following. Single or dual channel optical power meter with ranges from +23 to -80 dBm. Single or dual channel tunable laser source, 1525.00 nm to 1610.00 nm. Single or dual channel tunable filter, 1528.00 nm to 1603.00 nm. Optical attenuator, 0 to 60 dB. Single or dual channel optical spectrum analyzer, 1529.00 nm to 1602.00 nm. Optical channel monitor, 1529.00 nm to 1602.00 nm. Loss test set. Return loss test set. Tunable laser source full range sweep with 1 pm minimum step. Capable of being configurated as a passive optical component in a testing system to record testing spectrum curve.
Specifications.
Display: Graphical display 320 X 240 points visible, monochrome.
Display Resolution (Power Sensor Modules): 0.001 dB/dBm,0.001 nW / uW / mW.
Compatibility: GM8001B support GM81xxxxx serial modules.
Data Acquisitions Memory: 16M; 16M bits, flash.
Selectable data averaging time: dependent on sensor module.
Selectable total data averaging time: 20 ms to 23:59:59 h.
Interfaces: RS232, ETHERNET, USB.
Number of Modules: two.
|