Custom-Cal has a solution to replace your ANRITSU MP1764A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

The pocketBERT is a very affordable solution which allows for 10 Gb/s measurement and analysis of Bit Error Ratio. This standalone unit is exceptionally portable (4.2” x 5.7” x 1.3”) and is designed with field use in mind. The pocketBERT allows users to perform many of the measurements and functions (BERT, CDR and Frequency Synthesis) at a fraction of the cost of standard test equipment boxes.
  List Price $4,150.00
ANRITSU MP1764A 12.5 GHz Error Detector

POCKETBERT PB10A Hand Held 10 Gb/s CDR, BERT and Clock Synthesis Unit

ANRITSU MP1764A   Description / Specification: POCKETBERT PB10A   Description / Specification:      
The Anritsu MP1764A Error Detector is used in combination with the MP1763B Pulse Pattern Generator to detect errors used to evaluate conformity with ITU-T standards. In addition, complicated searching for input thresholds or phase adjustments is simplified with the touch of a single key. These functions are ideally suited for the research and development of ultrahigh-speed logic ICs and digital communication systems.

Operation frequency: 0.05 to 12.5 GHz.

Data input
Input waveform: NRZ.
Input voltage: 0.25 to 2.0 Vp-p.
Threshold voltage variable range: -3.000 to + 1.875 Vp-p (1 mV steps).
Phase margin: >=70 ps (typical value at 10 Gb/s, PRSS 2^23 - 1, and an input amplitude of 1 Vp-p.
Input sensitivity: 50 mVp-p (typical value at 10 Gb/s and PRBS 2^23 - 1.

Clock input
Input waveform: Rectangular wave «0.5 GHz), rectangular or sine wave (>=0.5 GHz), duty factor, 50%.
Input voltage: 0.25 to 2.0 Vp-p.
Input delay variable range: -500 to +500 ps (1 ps steps).

Receive Pattern
Pseudorandom binary sequence pattern (PRBS);
Pattern: 2^n-1 (n: 7, 9, 11 , 15, 20, 23, 31),
Mark ratio: 1/2, 1/4, 1/8, 0/8 (1/2, 3/4, 7/8, 8/8 are possible with logic inversion).
Number of AND bit shift when setting mark ratio: 1, 3 bits (selectable by using DIP switch on rear panel).
Tracking: Information of pattern set by the error detector is sent to the pulse pattern generator via GPIB.

The PocketBert pB10A is a fully integrated 10 Gb/s CDR unit with serial 10 GHz clock output and PRBS generator/checker and BER calculator unit. The unit recovers SONET STS192 and 10 Gb/s Ethernet/Fiber Channel clock and data streams in the entire data range from 9.95 Gb/s to 11.32 Gb/s. The build-in PRBS generator and checker enable the unit to test the BER of an electrical or optical link. There is no need for an external reference clock as the unit uses an internal programmable clock generator. If needed an external reference clock can be applied. The unit can also be used as a standalone precision wide range frequency source. It covers the range from 10 MHz to 760 MHz. CDR mode The pB10A receives a serial 10 Gb/s data stream from an O/E converter (APD or PIN) or any other electrical source and recovers clock and data. Typical applications are to extract the 10G clock while testing e.g. optical modules or other electrical PHY components where the testing equipment requires a recovered clock. BIST mode. The pB10A has the capability to generate and check various 10 Gb/s PRBS patterns (231–1, 223–1, 27-1 and custom defined). In this mode the unit can be used to evaluate 10 Gb/s components or links with or without XFP, SFP modules. Provides a cost-effective source to generate non synchronized 10 Gb/s traffic e.g. for DWDM test beds. Features. Data rates from 9.95 Gb/s to 11.35 Gb/s. Recovers clock and data from incoming serial data stream. Integrated pattern generator provides PRBS 231–1, 223–1, 27–1, and custom serial output patterns. Build in PRBS Checker and BER counter/ calculator. Programmable internal clock synthesizer. Complies with XFP MSA standards. 0°C to 50°C temperature range. 1000 V ESD rating. Small sized hand held bench top device (105 mm*144 mm*33 mm). Configuration and management via GUI interface to PC and API interface to access data fields in the GUI. Single wall mount power supply.

Please contact us about the POCKETBERT PB10A as a replacement for the ANRITSU MP1764A.

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: