|
|
General description of the
used FLUKE 5100B
for sale.
The Fluke 5100B is a five-function calibrator built for electrical calibration. It calibrates analog and digital multimeters to 4.5 digits, precision meters that measure ac or dc voltage (0-1100V), ac or dc current (200 uA-2A), and resistance (1 ohm to 10 Mohms).
Specifications.
Voltage DC Ranges/ Resolution:
20 mV / 0.1 μV,
200 mV / 1 μV,
2 V / 10 μV,
20 V / 100 μV,
200 V / 1 mV,
1100 V / 10 mV.
Uncertainty: ±(0.004% of setting +0 .001 % of range +5 μV) for all ranges, for 6 months, 20°C to 30°C ambient, non-override; ±(0.005% of setting +0.2 mV) for divider override mode.
Voltage AC Ranges/ Resolution:
20 mV / 0.1 μV,
200 mV / 1 μV,
2 V / 10 μV,
20 V / 100 μV,
200 V / 1 mV,
1100 V / 10 mV.
Uncertainty: ±(0.035% of setting +0.005% of range +50 μV) from 50 Hz to 10kHz and ±(0.06% of setting +0.008% of range +50 μV) from 10kHz to 50 kHz for 6 months, 20°C to 30°C ambient.
Frequencies Available (Hz): 50, 60, 70, 80, 90, 100, 200, 300, 400, 500, 600, 700, 800, and 900 for all voltage ranges.
Current DC Ranges/ Resolution:
200 μA / 1 nA,
2 mA / 10 nA,
20 mA / 100 nA,
200 mA / 1 μA,
2 A / 10 μA.
Uncertainty: ±0.015% of setting +0.002% of range +0.01 μA) for compliance voltage up to 1 V; Add 0.002% of setting per volt above 1 V rms; Applies for 6 months and 20°C to 30°C ambient
Current AC Ranges/ Resolution:
200 μA / 1 nA,
2 mA / 10 nA,
20 mA / 100 nA,
200 mA / 1 μA,
2 A / 10 μA.
Uncertainty: ±0.05% of setting +0 .005% of range +0.02 μA) for compliance voltage up to 1 V rms (50 Hz to 1 kHz). Add 0.005% of setting per volt above 1 V rms. Applies for 6 months in 20°C to 30°C ambient.
Resistance:
Range: 1 Ω to 10 MΩ in decade steps.
Uncertainty: ±0.003%, except ±0.015% (1 Ω), ±0.010% (10 Ω and 1 MΩ), and ±0.030% (10 MΩ) assumes 4 terminal below 100 kΩ. 6 mo 20°- 30°C.
Power Dissipation: 1W maximum except 100 mW max (1 MΩ) and 10 mW max (10 MΩ).
Options.
-03 Wide band AC Voltage.
-05 IEEE-488 Compatible Interface.
-06 EIA RS-232-C Interface.
|