Keysight (Agilent) J7232A REPAIR and Keysight (Agilent) J7232A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) J7232A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) J7232A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) J7232A   Description / Specification:    
Keysight (Agilent) J7232A OmniBER OTN Communications Performance Analyzer

OmniBER OTN J7232A 2.5 Gb/s analyzer supports all telecomms transmission rates from 1.5Mb/s to 10Gb/s. Fully standards compliant next generation SONET/SDH and OTN (ITU-T G.709) testing. ITU-T G.7041 (GFP Framed and Transparent) compliance test. ITU-T G.7042 (LCAS) compliance test. ITU-T G.707 (virtual concatenation -high and low order) compliance test with full 256ms delay generation. Internally generated Ethernet signals and measurements. Encapsulation analyzer captures, displays and decodes entire GFP frames. Industry leading jitter measurement accuracy through ITU-T O.172 Appendix VII calibration and characterization. Optical power, frequency and service disruption times. Jitter capabilities include: jitter generation, output jitter measurements, jitter tolerance, wander tolerance, jitter transfer measurements, standard and user defined jitter masks, rapid jitter measurements, a bank of up to five digital filters each with their own peak detector, parallel measurement processing. Industry leading 15mUI fixed intrinsic with full ITU-T O.172 Appendix VII calibration and accuracy map plotted for each individual instrument.



 

Standard Calibration $810.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) J7232A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your Keysight (Agilent) J7232A REPAIR and/or Keysight (Agilent) J7232A OmniBER OTN Communications Performance Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: