Keysight (Agilent) 37717C REPAIR and Keysight (Agilent) 37717C CALIBRATION
The Keysight (Agilent) 37717C is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 37717C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 37717C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   Keysight (Agilent) 37717C   Description / Specification:    
Keysight (Agilent) 37717C Communications Performance Analyzer, SDH/PDH/ATM Test Set

The HP 37717C Communications Performance Analyzer is rugged and portable, it allows full functional testing of SDH, PDH and ATM equipment, including jitter generation and measurement. It has a color display and graphics printer with a 3.5-inch disk drive for results retrieval and storage, firmware upgrades, and results export to PC applications. It optionally provides dual-standard testing for both SONET and SDH standards up to 622 Mb/s. Combined with DS1/DS3 and ITU-T SDH rates from STM-4 (622 Mb/s) through STM-1 (155 Mb/s) to STM-0 (52 Mb/s). Optical 1310 nm and 1550 nm interfaces are supported as well as electrical interfaces at all rates. A range of PDH rates from 140 Mb/s to 704 kb/s are also supported. The measurement capability is configured using a modular architecture, allowing fully flexible configurations and full upgradeability. The ATM cell module gives transmit and receive capability at the physical and cell layers, and through-mode monitor for convenient access. Interfaces; Unstructured PDH: 0.7, 2, 8, 34 and 140 Mb/s to G.703. Structured PDH: DS1, DS3, 2, 8, 34, 140 Mb/s to G.703. SDH: STM-0e, STM-1e, STM-0o, STM-1o and STM-4o, STM-16o (1310 nm and 1550 nm). SONET: STS-1, STS-3, OC-1, OC-3, OC-12, OC-48 (1310 and 1550 nm)



 

Standard Calibration $785.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 37717C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Accuracy
Accuracy is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Receiver Sensitivity
Receiver Sensitivity is the optical power required by a receiver for low error signal transmission. In the case of digital signal transmission, the mean optical power is usually quoted in Watts or dBm (decibels referred to 1 milliwatt).

Please contact us for your Keysight (Agilent) 37717C REPAIR and/or Keysight (Agilent) 37717C Communications Performance Analyzer, SDH/PDH/ATM Test Set CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: