Keysight (Agilent) 438A REPAIR and Keysight (Agilent) 438A CALIBRATION
The Keysight (Agilent) 438A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 438A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 438A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Meter?
Shop for Comparable Products on our  used RF Power Meter page

 
   Keysight (Agilent) 438A   Description / Specification:    
Keysight (Agilent) 438A Dual-Ch Digital RF Power Meter

The Agilent 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the HP 8480 series of thermocouple and diode power sensors. Specifications. Frequency Range: 100 kHz to 110 GHz, sensor dependent. Power Range: –70 to +44 dBm (100 pW to 25 W), sensor dependent, uses HP 8480 series power sensors. Instrumentation Accuracy. Single Channel: ±0.5% (watt mode) or ±0.02 dB (dBm mode), Dual Channel: ±1% (watt mode) or ±0.04 dB (dBm mode). Zeroing: Automatic, ±0.5% of full scale on most sensitive range. Power Reference. Power Output: 1.00 mW. Factory set to ±0.7%, traceable to the U.S. National Institute Standards and Technology. Accuracy: ±1.2% worst case (±0.9% rss) for 1 year. Connector: Front panel type-N female (also rear panel Option 002). Options. Opt 002 Rear-Panel Sensor Connector (in parallel with front panel) and additional reference oscillator with rear-panel output. Opt 700 Internal MATE Programming. Opt 004 Deletes Power Sensor Cables.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 438A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your Keysight (Agilent) 438A REPAIR and/or Keysight (Agilent) 438A Dual-Ch Digital RF Power Meter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: