Keysight (Agilent) 6267B CALIBRATION and Keysight (Agilent) 6267B REPAIR
The Keysight (Agilent) 6267B is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6267B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 6267B   Description / Specification:    
Keysight (Agilent) 6267B 40V 10A Single Output DC Power Supply

The HP 6267B high-performance Constant Voltage/ Constant Current employs a transistor series-regulator / triac-preregulator circuit to achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact full-rack width package, Separate coarse and fine voltage and current controls allow the voltage and current outputs to be varied from zero to the maximum rated value. Crossover form constant voltage to constant current operation occurs automatically when the load current exceeds the value established by the current control settings. Additional features include built-in overvoltage crowbar protection; remote error sensing; and auto-series, auto-parallel, and auto-tracking operation. The crowbar trip point adjustment and associated overvoltage indicator are conveniently located on the front panel. Auto-series, auto-parallel, and auto-tracking connections should ordinarily include no more than three supplies. Specifications. DC Outrput: 0 to 40 VDC, 0 to 10 A. Load Effect: Voltage, 0.01% + 200 uV; Current, 0.02% + 500 uA. Source Effect: Voltage, 0.01% + 200 uV; Current, 0.02% + 500 uA. PARD (rms/ p-p): Voltage, 200 uV / 10; Current, 3 mA rms. Drift (stability): Voltage, 0.03% + 2mV; Current, 0.03% + 3 mA. Load effect transient recovery: time-50 /uS, Level 10 mV. Resolution: voltage control less than 0.02%, Current control less than 0.15%. Temperature coefficient per C: 0.01% of output plus 200 /uV. Typical output impedance: 500 micro-ohm, 1 uH. Analog Meters.



 

Standard Calibration $145.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6267B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) 6267B CALIBRATION and/or Keysight (Agilent) 6267B 40V 10A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: