FLUKE 117 CALIBRATION and FLUKE 117 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 117 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 117   Description / Specification:    
FLUKE 117 Handheld True RMS Digital Multimeter

The Fluke 117 Electrician’s Multimeter with Non-Contact Voltage is for electricians working in commercial and noncommercial premises (like hospitals and schools), the 117 is recommended. It includes extras like non-contact voltage detection to help get the job done faster and safer. Features: True RMS readings. 6000 Counts. AutoVolt: Automatic AC/DC voltage selection. VoltAlert™, Non-contact voltage detection. LoZ: low input impedance to prevent ghost voltage. Min/Max/Average to record signal fluctuations. Auto/manual ranging. Display hold. Specifications. Voltage DC Maximum: 600 V. Voltage DC Maximum Resolution: 1 mV. Voltage DC Best Accuracy: ±(0.5%+2). Voltage AC Maximum: 600 V. Voltage AC Maximum Resolution: 1 mV. Voltage AC Best Accuracy: ±(1.0%+3). Current DC Maximum: 10.00 A. Current DC Maximum Resolution: 1 mA. Current DC Best Accuracy: ±(1.0%+3). Current AC Maximum: 10.00 A. Current AC Maximum Resolution: 0.01 A. Current AC Best Accuracy: ±(1.5%+3). Resistance Maximum: 40 M-ohm. Resistance Maximum Resolution: 0.1 ohm. Resistance Best Accuracy: ±(0.9%+1). Capacitance Maximum: 10000 µF. Capacitance Maximum Resolution: 1 nF. Capacitance Best Accuracy: ±(1.9%+2). Frequency Maximum: 50 kHz. Frequency Maximum Resolution: 0.01 Hz. Frequency Best Accuracy: ±(0.1%+2). Battery type: 9 volt Alkaline, 400 hours typical.



 

Standard Calibration $65.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 117. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your FLUKE 117 CALIBRATION and/or FLUKE 117 Handheld True RMS Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: