|
|
General description of the
used TEKTRONIX TDS5054B
for sale.
The Tektronix TDS5054B 500 MHz Digital Phosphor Oscilloscopes (DPO) delivers 5 GS/s real-time sample rate, up to 16 M record length, and a suite of advanced triggers, enabling you to capture and characterize even your most demanding signals. DPOs provide unmatched insight into signal behavior by displaying, storing, and analyzing complex signals in real time using three dimensions of signal information: amplitude, time, and distribution of amplitude over time. It offers a Tektronix-exclusive MyScope customizable oscilloscope user interface. MyScope is a powerful feature that allows you to build your own control windows with only the controls, features, and capabilities that you care about and are important in your job. The TDS5054B includes a complete parametric measurement system for signal characterization. Select from 53 automatic measurements using a graphical palette that logically organizes measurements into Amplitude, Time, Combination, Histogram, and Communications categories. Input Channels: 4. Analog Bandwidth (–3 dB) 5 mV/div -1 V/div: 500 MHz. Calculated Rise Time 5 mV/div (Typical): 800 ps. Hardware Bandwidth Limits: 150 MHz or 20 MHz.Input Coupling: AC, DC, GND. Input Impedance, 1 Mohm: ±1%. Input Impedance, 50 ohm: ±1%. Input Sensitivity, 1 Mohm: 1 mV/div to 10 V/div. Input Sensitivity, 50 ohm: 1 mV/div to 1 V/div. Vertical Resolution: 8 bits (>11 bits w/ averaging). DC Gain Accuracy: 1.5% with offset set to 0 V. Time-base Range: 200 ps/div to 1000 s/div. Time-base Delay Time Range: (s/div × 10) to 1000 s. Channel-to-Channel Deskew Range: ±75 ns. Time-base Accuracy: 15 ppm. Delta Time Measurement Accuracy: (0.06/sample rate + 15 ppm × |Reading|) RMS. Real-time Sample Rates: 1 Channel (Max) 5 GS/s, 2 Channels (Max) 2.5 GS/s, 3-4 Channels (Max) 1.25 GS/s. Maximum Record Length per Channel with Standard Memory: 16M/8M/4M. Time Resolution (Single shot): 200 ps (5 GS/s). 10.4 in. Bright Display. GPIB Controller. CD-RW Drive. Opt. 1R, Rackmount kit. Opt. SM, Communication mask testing. Opt. VNM, CAN bus decode requires ATM1 trigger module. Opt. PS1, Power bundle. Opt. CP2, TDSCPM2 – ANSI/ITU telecom pulse compliance testing software. Opt. ET3, TDSET3 – Ethernet compliance test software. Opt. J2, TDSDDM2 – Disk drive measurement software. Opt. JA3, TDSJIT3 v2.0 Advanced – Jitter and timing analysis software. Opt. JE3, TDSJIT3 v2.0 Essentials – Jitter and timing analysis software. Opt. PW3, TDSPWR3 – Power measurement software. Opt. USB, USB 2.0 compliance test software only.
|