AEROFLEX-IFR 6911 CALIBRATION and AEROFLEX-IFR 6911 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR 6911 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our
 used RF Power Sensor page

 
   AEROFLEX-IFR 6911   Description / Specification:    
AEROFLEX-IFR 6911 20 GHz Thermocouple Power Sensor

The Aeroflex 6911 20 GHz Thermocouple Power Sensor has high measurement accuracy over a wide frequency range that is ensured by low input VSWR. It has rugged mechanical construction makes them ideal for both bench and field use.
Specifications.

Frequency Range: 10 MHz to 20 GHz.
Power Range: -30 to +20 dBm (1 μW to 100 mW).
Maximum RF Input: +25 dBm (300 mW) CW, +42 dBm (15 W) peak for 2 μs.
Sensing Element: Semiconductor thermocouple.
VSWR:
   <1.25, 10 MHz - 30 MHz;
   <1.1, 30 MHz - 2GHz;
   <1.18, 2 GHz - 16 GHz;
   <1.28, 16 GHz - 18 GHz;
   <1.4 typical, 18 GHz - 20 GHz.
Linearity Factor: Provided with sensor.
Linearity Accuracy: ±0.5% at 25°C between +10 and +20 dBm, improves by a factor of 10 for each lower range.
Resolution: 0.01%.
RF Connector: APC-7, male 50 Ω.



 

Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR 6911. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).


Please contact us for your AEROFLEX-IFR 6911 CALIBRATION and/or AEROFLEX-IFR 6911 20 GHz Thermocouple Power Sensor REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: