AEROFLEX-IFR 3413 CALIBRATION and AEROFLEX-IFR 3413 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR 3413 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   AEROFLEX-IFR 3413   Description / Specification:    
AEROFLEX-IFR 3413 Digital RF Signal Generator

The IFR 3413 is an Agile Signal Generator with high quality analog and vector modulation capabilities. Careful attention to the design of the modulators and the RF system ensures that this signal generator exhibits low levels of adjacent channel power, making it suitable for the most demanding amplifier linearity and receiver selectivity measurements. The use of Aeroflex fractional N synthesis techniques, combined with fast level control and an electronic attenuator, ensures the 3413 signal generator is both frequency and level agile for high speed ATE testing. The 3414 has excellent performance with typically 1.5 Hz residual FM at 1 GHz and a floor noise of typically better than -148 dBc / Hz. Carrier Frequency Range: 250 kHz - 3 GHz. Resolution: 1 Hz, accuracy as frequency standard The carrier output phase can be advanced or retarded in increments of 0.036°. RF Output Range (Max): -140 to +16 dBm (Electronic Attenuator), -140 to +19 dBm (Mechanical Attenuator), 0 to +20 dBm ( No Attenuator). Resolution: 0.01 dB. Harmonics: <-30 dBc, typically <-40 dBc for output levels <=+7 dBm. Attenuator Options. Option 001: No attenuator. Option 002: Mechanical attenuator. Option 003: Electronic attenuator. Option 005: ARB waveform generator (Not available with Option 008). Option 006: Pulse Modulation (Requires Option 003, not available with Option 009). Option 007: Rear panel outputs (RF Output only with Option 009). Option 008 ; Real Time Baseband (Not available with Option 005 or 009). Option 009: Differential I/Q output (Requires Option 005, not available with Option 006). Option 010: List Mode (Requires Option 003).



 

Standard Calibration $565.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR 3413. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your AEROFLEX-IFR 3413 CALIBRATION and/or AEROFLEX-IFR 3413 Digital RF Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: