AEROFLEX-IFR 3416 REPAIR and AEROFLEX-IFR 3416 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the AEROFLEX-IFR 3416. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR 3416 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   AEROFLEX-IFR 3416   Description / Specification:    
AEROFLEX-IFR 3416 Digital RF Signal Generator

The IFR 3416 is an Agile Signal Generator with high quality analog and vector modulation capabilities. Careful attention to the design of the modulators and the RF system ensures that this signal generator exhibits low levels of adjacent channel power, making it suitable for the most demanding amplifier linearity and receiver selectivity measurements. The use of Aeroflex fractional N synthesis techniques, combined with fast level control and an electronic attenuator, ensures the 3416 signal generator is both frequency and level agile for high speed ATE testing. The 3414 has excellent performance with typically 1.5 Hz residual FM at 1 GHz and a floor noise of typically better than -148 dBc / Hz. Carrier Frequency Range: 250 kHz - 6 GHz. Resolution: 1 Hz, accuracy as frequency standard The carrier output phase can be advanced or retarded in increments of 0.036°. RF Output Range (Max): -140 to +16 dBm (Electronic Attenuator), -140 to +19 dBm (Mechanical Attenuator), 0 to +20 dBm ( No Attenuator). Resolution: 0.01 dB. Harmonics: <-30 dBc, typically <-40 dBc for output levels <=+7 dBm. Attenuator Options. Option 001: No attenuator. Option 003: Electronic attenuator. Option 005: ARB waveform generator (Not available with Option 008). Option 006: Pulse Modulation (Requires Option 003, not available with Option 009). Option 007: Rear panel outputs (RF Output only with Option 009). Option 008 ; Real Time Baseband (Not available with Option 005 or 009). Option 009: Differential I/Q output (Requires Option 005, not available with Option 006). Option 010: List Mode (Requires Option 003).



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR 3416. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your AEROFLEX-IFR 3416 REPAIR and/or AEROFLEX-IFR 3416 Digital RF Signal Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: