AEROFLEX-IFR FM/AM-1200S REPAIR and AEROFLEX-IFR FM/AM-1200S CALIBRATION

 
Custom-Cal has a high success rate in the repair of the AEROFLEX-IFR FM/AM-1200S. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR FM/AM-1200S Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

 
   AEROFLEX-IFR FM/AM-1200S (1200S)   Description / Specification:    
AEROFLEX-IFR FM/AM-1200S Communications Service Monitor

The IFR FM/AM-1200S is a processor controlled, digitally synthesized FM/AM /SSB receiver and generator, with an integral oscilloscope / spectrum analyzer. The receiver is a triple con version superheterodyne receiver capable of receiving Signals from 250 kHz to 999.9999 MHz. The signal generator is capable of producing modulated or unmodulated RF signals from 250 kHz to 999.9999 MHz. A function generator will produce six functions with ranges from 10 Hz up to 10 kHz and one function up to 30 kHz. A duplex generator can produce a signal up to ±49.99 MHz from the received frequency. The oscilloscope and spectrum analyzer on the IFR FM/AM-1200S utilize a common CRT. Bandwidth of the oscilloscope is DC to 1 MHz and the dynamic range of the spectrum analyzer on the FM/AM-1200S is from -30 dBm to -100 dBm. Specification. RF Signal Generator Frequency Range: 250 kHz to 999.9999 MHz in 100 Hz increments. Frequency Accuracy: ±5 Hz + Master Oscillator. Residual FM: < 100 Hz RMS (300 Hz to 3 kHz bandwidth). Harmonics: 2nd Harmonic <= - 30 dBc, 3rd Harmonic <= -45 dBc. RF Output Power: -121 dBm to -20 dBm (10 dB steps with 11 dB range vernier) into 50 Ohms. RF Output Accuracy: ±2.5 dB. Duplex Generator Frequency Range: ±49.99 MHz from receive frequency in 10 kHz steps. Frequency Resolution: 2.5 kHz.



 

Standard Calibration $590.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR FM/AM-1200S. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Multiplexing
Multiplexing (also known as muxing) is a method by which multiple analog message signals or digital data streams are combined into one signal over a shared medium. Multiplexing divides the capacity of the low-level communication channel into several higher-level logical channels, one for each message signal or data stream to be transferred.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your AEROFLEX-IFR FM/AM-1200S REPAIR and/or AEROFLEX-IFR FM/AM-1200S Communications Service Monitor CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: