ILX LIGHTWAVE LDT-5980 REPAIR and ILX LIGHTWAVE LDT-5980 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ILX LIGHTWAVE LDT-5980. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDT-5980 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another TEC Temperature Controller?
Shop for Comparable Products on our  used TEC Temperature Controller page

 
   ILX LIGHTWAVE LDT-5980   Description / Specification:    
ILX LIGHTWAVE LDT-5980 10 A / 12 V High Power Temperature Controller

The ILX LDT-5980 120W High Power Temperature Controller is a bi-directional current source with precision measurement circuits to monitor and control the temperature of the device under test. Temperature Control Output Range: -50 degC to +250.000 degC, IC Sensor: -50 degC to +150.000 degC, RTD: -50 degC to +199.999 degC, Setpoint Accuracy T Mode: +/-0.01 degC, Ite Mode: +/-0.03A, Vte Mode: +/-0.05V (typical), Setpoint Resolution T Mode: 0.001 degC, Ite Mode: 0.001A, Vte Mode: 0.001V, Temperature Stability (24 hours): +/-0.005 degC. Output Type: bidirectional current source, +/-12 VDC, -10.000 to 10.000 A, 120 W, 15 mA rms current noise and ripple (typical). Current Limit Range -10 A to 10 A @ +/-0.050 A.



 

Standard Calibration $415.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDT-5980. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your ILX LIGHTWAVE LDT-5980 REPAIR and/or ILX LIGHTWAVE LDT-5980 10 A / 12 V High Power Temperature Controller CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: