JDSU BBS1550 CALIBRATION and JDSU BBS1550 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU BBS1550 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   JDSU BBS1550   Description / Specification:    
JDSU BBS1550 C-Band Broadband Light Source

The JDS Uniphase BBS1550 high power Broadband Source series emit a higher optical output than conventional EELEDs and operate over the EDFA (1527-1568 nm) window. Through optimization of spectral power density, spectral uniformity and optical stability, the broadband sources maximize your capabilities of optical component spectral measurements and systems compliance tests both in manufacturing and research and development environments. The optical broadband sources incorporate erbium-doped fiber to produce amplified spontaneous emission or a semiconductor device to produce a broad high power optical spectrum. By optically pumping an erbium-doped fiber, the C band sources emit a flattened amplified spontaneous emission (ASE) optical spectrum over their entire wavelength range. Total optical power: > 50 mW, > 100 mW or > 150 mW. Gain flattened range: 1529-1565 nm. Total output power stability: 0.02 dB. Output isolation (minimum): 45 dB.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU BBS1550. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your JDSU BBS1550 CALIBRATION and/or JDSU BBS1550 C-Band Broadband Light Source REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: