A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEITHLEY 263 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our
 used Calibrator page

   KEITHLEY 263   Description / Specification:    
KEITHLEY 263 Calibrator/Source

5.5 Digit Calibrator/Source: ±10fA to ±20mA current output range, 0.03% current accuracy, ±5µV to ±20V voltage output range, 0.02% voltage accuracy, GPIB. DC Volts Range 200mV - 20V, 3 Range steps (1/10/100), resolution 5 µV - 500 µV, 1 yr accuracy 0.0175%. DC Current Range 2 pA - 20mA, 11 Range steps (1/10/100), resolution .00005 pA - 500 nA, 1 yr accuracy 0.15%. Resistance Range 1 kOhm - 100000 MOhm, 9 range steps (1/10/100), 1 yr accuracy 0.40%. Coulombs range 20pC - 20µC, resolution .5fC - 500pC. O/p connector: 2-lug triaxial co. Max. Common Mode V: 350Vpk. Secondary calibration standard. Switch up to 200V


Standard Calibration $475.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEITHLEY 263. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your KEITHLEY 263 CALIBRATION and/or KEITHLEY 263 Calibrator/Source REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: