KEITHLEY 2302-PJ CALIBRATION and KEITHLEY 2302-PJ REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEITHLEY 2302-PJ Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   KEITHLEY 2302-PJ   Description / Specification:    
KEITHLEY 2302-PJ Single Channel Battery/Charger Simulator

Power Supply DC: Output Voltage of 0 to +15VDC, Output Accuracy ±(0.05% + 3mV). Load Regulation 0.01% + 2mV, Line Regulation 0.5 mV. Continous Average Output Current 0–4V: 5A max. >4V: I = 60W / (V + 6) (Not intended to be operated in parallel).Continuous Average Sink Current 0–5V: 3A max. 5–15V: Derate 0.2A per volt above 5V. Compliance setting controls sinking. Input Voltage Range –5 to +30VDC. Input Impedance: 2Mohm typical.



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEITHLEY 2302-PJ. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your KEITHLEY 2302-PJ CALIBRATION and/or KEITHLEY 2302-PJ Single Channel Battery/Charger Simulator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: