ADVANTEST R3767CH CALIBRATION and ADVANTEST R3767CH REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ADVANTEST R3767CH Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ADVANTEST R3767CH   Description / Specification:    
ADVANTEST R3767CH 8 GHz Vector Network Analyzer, 50 ohm

The Advantest R3767CH is a vector network analyzerwhich can measure the amplitude, phase, group delay time and impedance of high-frequency electronic devices with high precision and high speed. High speed measurement of 0.15ms/point (at normalized calibration) or 0.25ms/point (at 2- port full calibration) with 10 kHz resolution bandwidth. With it's built-in S-parameter test set, the R3767CH can measure forward characteristics (S11 and S21) and reverse characteristics (S22 and S12) with high accuracy in auto-reversing mode. By connecting the optional duplexer test adapter, it can measure a duplexer with three ports. Specifications. Signal Source Measurement frequency Range: 40 MHz to 8.0 GHz. Set resolution: 1 Hz. Measurement resolution: ±0.005 ppm. Accuracy: ±20 ppm (25°C ±5° C). Stability: ±5 ppm (25°C ±5° C). Output level Range (40 MHz to 3.8 GHz): +10 to -15 dBm. Output impedance: 50 ohms. Receiver Resolution bandwidth: 10 kHz to 10 Hz (in 1 or 3 steps). Amplitude resolution: 0.001 dB. Display: 7.8-inch TFT color LCD.



 

Standard Calibration $985.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ADVANTEST R3767CH. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your ADVANTEST R3767CH CALIBRATION and/or ADVANTEST R3767CH 8 GHz Vector Network Analyzer, 50 ohm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: