MEGGER MIT230 CALIBRATION and MEGGER MIT230 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MEGGER MIT230 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   MEGGER MIT230   Description / Specification:    
MEGGER MIT230 250/500/1000V Insulation and Continuity Tester

The Megger MIT230 insulation and continuity tester is used for installing electrical installations, on both domestic and industrial systems, as well as within site maintenance and service departments. It is also ideal for testing domestic appliances, power tools, transformers, motors, generators, switchgear, electrical panels etc., as well as fixed electrical wiring systems.
Specifications.

Insulation Range.
Nominal test voltages: 250, 500, 1000 V (dc).
Measurement range: 10 kΩ - 1000 MΩ on all ranges, Terminal voltage on open circuit (dc) -0 % +25 % of rated voltage.
Test current on load: >1 mA at minimum pass values of insulation as specified in BS 7671, HD 384, IEC 364 and VDE 0413 part 1.

Continuity Range.
Measuring range: 0.01 Ω - 100.0 Ω (0 -50 Ω on analog scale).
Open circuit voltage: 5 V ±1 V.
Short circuit current: 205 mA +10 mA -5 mA >18 mA (10 - 100 Ω).
Accuracy (at 20° C): ±0.01 Ω to 9.99 Ω ± 3 % ±2 digits, 10.0 Ω to 99.9 Ω ± 5 % ±2 digits.
Zero offset adjust: 0 to 9.99 Ω.
Continuity buzzer: Operates at < 2 Ω.
Default voltmeter: >25 V a.c. or d.c. is applied display will operate as a voltmeter.

Voltmeter.
Range: 25 V to 600 V @ 50/60 Hz & dc.
Accuracy: 25 V to 450 V ac/dc ± 1% ± 1 digit, 450 V to 600 V ac ± 2% ± 1 digit.



 

Standard Calibration $210.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the MEGGER MIT230. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your MEGGER MIT230 CALIBRATION and/or MEGGER MIT230 250/500/1000V Insulation and Continuity Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: