AEMC 4620 CALIBRATION and AEMC 4620 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEMC 4620 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   AEMC 4620 (2130.43)   Description / Specification:   Spec Sheet 
AEMC 4620 4-Point Ground Resistance Tester

The AEMC 4620 4-Point Ground Resistance Tester performs ground resistance and soil resistivity tests. This direct reading testers measures from 0 to 2000 ohm, and is auto-ranging, so it automatically seeks outs the optimum measurement range. The Model 4620 is rugged, easy-to-use and is ideal for maintenance crews performing numerous tests. It exceeds mechanical and safety specifications for shock, vibration and drop tests called out in IEC standards. It is designed to reject high levels of interference, so it can be used under difficult conditions such as high stray currents that normally affect accuracy. Applications; Three-Point measurements of resistance to ground of ground rods and grids. Four-Point tests or soil resistivity measurements. Touch potential measurements, an alternative to 3-Point tests in evaluating electrical safety. Specifications. Measurement Ranges: Auto-ranging 0 to 2000 ohm. Resistance Resolution: 10 m-ohm (20 ohm), 100 m-ohm (200 ohm), 1 ohm (2000 ohm). Resistance Accuracy: 2% of Reading ± 1ct (20, 200 ohm), 5% of Reading ± 3cts (2000 ohm). Operating Frequency: 128 Hz square wave. Response Time: Approximately four to eight seconds for a stabilized measurement. Withstanding Voltage: 250 Vac or 100 Vdc.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEMC 4620. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your AEMC 4620 CALIBRATION and/or AEMC 4620 4-Point Ground Resistance Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: