Keysight (Agilent) 10070C CALIBRATION and Keysight (Agilent) 10070C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 10070C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our
 used Oscilloscope Accessory page

 
   Keysight (Agilent) 10070C   Description / Specification:    
Keysight (Agilent) 10070C Passive Divider Probe

The Agilent 10070C passive probe has a 1:1 attenuation ratio and 1 M ohm input impedance, it is ideal as a general purpose, high bandwidth passive probe for the Keysight / Agilent 300 MHz - 1 GHz 6000 series, 7000, 8000 and 9000 Series oscilloscopes. The probe identification feature automatically configures the oscilloscope for the probe attenuation.
Specifications.

Propagation Delay: 7 ns (1.5 m probe cable length).
System Bandwidth: 20 MHz.
System Risetime (Calculated): 17.5 ns.
Attenuation Ratio: 1:1.
Input Resistance (when terminated into 1 MΩ): 1 MΩ.
Input Capacitance: ≈70 pF.
Maximum Input (dc + peak ac): 400 Vpk CAT I (mains isolated), 400 Vpk CAT II (post receptacle mains).
Compensation Range: none.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 10070C CALIBRATION and/or Keysight (Agilent) 10070C Passive Divider Probe REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: