SORENSEN DCR300-3B REPAIR and SORENSEN DCR300-3B CALIBRATION
The SORENSEN DCR300-3B is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the SORENSEN DCR300-3B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCR300-3B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   SORENSEN DCR300-3B   Description / Specification:    
SORENSEN DCR300-3B 300V 3A Single Output DC Power Supply

The Sorensen DCR300-3B high power programmable power supply has an input SCR controlled regulator which provides unparalleled reliability along with regulation and transient response performance suitable for nearly all burn-in and test applications. It has remote voltage and resistance programming in voltage and current modes. Adjustable current limiting (overload/short circuit protection) with automatic recovery and overvoltage protection with crowbar standard. Specifications. Output Power: 0 to 300 VDC, 3.0 A. Constant Voltage Ripple (PARD) (mV rms): 700. Constant Currennt Ripple (PARD) (mA rms): 7. Temp. Coeff Voltage: 45 mV/C, 0.9 mA/C. Programming Constants: 40 ohms/Volt, 133 ohms/Amp. Signal (Volt In/ Volt out): 1/30. Efficiency: 82 % (typ). Voltage Regulation: 0.03% with load change. Voltage resolution: 0.05% of Eo max. (typical). Transient Response: 50 ms (typical) to return to ± 1% band for step load change of 50 to 100% of full load. Current Regulation: 0.25% with 0 to 95% compliance-voltage change and ± 10% line voltage change combined. Current resolution: 0.05% of Io max. (typical). Current Drift (% Io max): 0.15% (typical).



 

Standard Calibration $260.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCR300-3B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your SORENSEN DCR300-3B REPAIR and/or SORENSEN DCR300-3B 300V 3A Single Output DC Power Supply CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: