SORENSEN DCS40-25E REPAIR and SORENSEN DCS40-25E CALIBRATION

 
Custom-Cal has a high success rate in the repair of the SORENSEN DCS40-25E. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS40-25E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   SORENSEN DCS40-25E   Description / Specification:    
SORENSEN DCS40-25E 40V 25A Single Output DC Power Supply

The Sorensen DCS40-25E DC System Power Supply is designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size. An automatic crossover system enables the unit to switch operating modes in response to varying load requirements. Features. Simultaneous digital display of both voltage and current. Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output. Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage. Remote sensing to compensate for losses in power leads. Remote voltage, resistive, current limit and OVP programming with selectable programming constants. Optional IEEE-488 interface for complete remote programming and readback capability. Specifications. Output Voltage: 0 to 40 V. Output Current: 0 to 25 A. Output Power: 1000 W. Line Regulation Voltage: 40 mV. Line Regulation Current: 25 mA. Load Regulation Voltage: 40 mV. Load Regulation Current: 24 mA. Meter Accuracy Voltage: 0.5 V. Meter Accuracy Current: 0.35 A. OVP Adjustment Range: 2 to 44 V. Output Noise and Ripple (V) (20 Hz - 20 MHz): Rms 4 mV, p-p 60 mV. Stability Voltage: 20 mV. Stability Current: 12.5 mA. Temperature Coefficient Voltage: 8 mV/°C. Temperature Coefficient Current: 7.5 mA/°C. Maximum Remote Sense Line Drop Compensation/line: 4 V.



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS40-25E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your SORENSEN DCS40-25E REPAIR and/or SORENSEN DCS40-25E 40V 25A Single Output DC Power Supply CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: