TEKTRONIX 2710 REPAIR and TEKTRONIX 2710 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the TEKTRONIX 2710. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX 2710 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   TEKTRONIX 2710   Description / Specification:    
TEKTRONIX 2710 1800 MHz Portable RF Spectrum Analyzer

The Tektronix 2710 1800 MHz RF Spectrum Analyzer features ease of use, Enhanced by Automated Calibration (Normalization), Dedicated Function Keys, Microprocessor Control, Pushbutton Measurements. Specifications. Frequency Range: 10 kHz to 1800 MHz. Center Frequency Accuracy:1 x 10^-5 ±5 kHz. Dot Marker Frequency Accuracy: CF Accuracy plus 3% of span. Short-Term Drift: 20 kHz maximum drift between correction cycles. Residual FM: ± 2 kHz p-p/20 µsec. Noise Sidebands: > - 70 dBc at 30 x RBW (Resolution Bandwidth). Frequency Span/Div Range: 180 MHz to 10 kHz. Span Accuracy: ±3% measured over the center eight divisions. Amplitude Flatness: ±1.5 dB measured with 10 dB RF attenuation (preamp off). Vertical Display Modes: 10, 5, 1 dB/div, Linear. Measurement Range: -129 (preamp on) to + 20 dBm. Display Dynamic Range: 80 dB max. Display Amplitude Accuracy: 10 dB/div, ± 1.0 dB/10 dB to max. cum. error of ± 2 dB over 80 dB range. RF Attenuation Range: 0-50 dB, 2 dB steps. Maximum Sensitivity: - 117 dBm at 3 kHz RBW, -129 dBm at 3 kHz RBW w/preamp. Sweep Times: 1 µsec to 2 sec/div in 1,2,5 seq. (7 decade range); AUTO SWEEP mode; MANUAL SWEEP select. Sweep Time Accuracy: ± 10% over the center 8 divisions. Options. Option 01, 300 Hz resolution bandwidth/ phaselock stabilization / 5 x 10^-7 frequency accuracy. Option 02, Internal frequency counter with selectable 1 kHz/1 Hz readout resolution. Option 06, Battery operation. Option 09, Centronics interface. Option 10, Video monitor mode. Option 11, Nonvolatile storage. Option 15, Tek 1405 TV Sideband Analyzer Interface.



 

Standard Calibration $415.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX 2710. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your TEKTRONIX 2710 REPAIR and/or TEKTRONIX 2710 1800 MHz Portable RF Spectrum Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: