TEKTRONIX CFG253 CALIBRATION and TEKTRONIX CFG253 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX CFG253 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   TEKTRONIX CFG253   Description / Specification:    
TEKTRONIX CFG253 Function Generator

The Tektronix CFG253 Function Generator produces sine, square, and triangle waves, and TTL signals for testing amplifiers, filters, and digital circuits. Sweep function can be controlled internally or with an external signal. Duty cycle, DC offset, sweep rate, sweep width, and amplitude are all operator controlled. Specifications. Waveform Outputs: Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs. Ranges: 1 Hz to 1.0 MHz in 7 ranges. Frequency Multiplier: Variable from 0.2 to 2.0 times the selected frequency range. Dial Accuracy: ±5% of full scale. Sine Wave Distortion: <1% (10 Hz to 100 kHz). Square Wave Response: <= 100 ns rise/fall time, maximum output into 50 ohm load. Main Output Amplitude: 0-20 V p-p. Attenuator: 20 dB. Internal Variable Sweep Rate. 0.5 Hz to 50 Hz. SYNC/TIL Output: TTL output level, rise <25 ns, (20 TTL load) >= 3 V p-p. Symmetry / Duty Cycle: 5 to 1 minimum symmetry change. Internal Variable Sweep Rate: 0.5 Hz to 50 Hz.



 

Standard Calibration $345.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX CFG253. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your TEKTRONIX CFG253 CALIBRATION and/or TEKTRONIX CFG253 Function Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: