TEKTRONIX CFG280 CALIBRATION and TEKTRONIX CFG280 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX CFG280 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   TEKTRONIX CFG280   Description / Specification:    
TEKTRONIX CFG280 Function Generator w/Counter

The Tektronix CFG280 combines an 11 MHz Function Generator, which produces sine, square, and triangle waves, plus TTL signals, with a 100 MHz Frequency Counter. The onboard counter allows the operator to set the frequency output of the function generator precisely. This versatile instrument conserves both benchtop and budget by combining the two capabilities. Specifications. Waveform Outputs: Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs. Ranges: 0.1 Hz (calibrated) to 11 MHz in 8 ranges. Frequency Multiplier: Variable from 0.1 to 1 (uncalibrated), 1 to 11 (calibrated). Dial Accuracy: ±5% of full scale from 0.1 Hz to 10 MHz. Sine Wave Distortion: <1% (10 Hz to 100 kHz), -30 dB at all other frequencies. Square Wave Response: <= 25 ns rise/fall time, maximum output into 50 ohm load. Main Output Amplitude: 0-20 V p-p. Attenuator: 20 dB. Internal Variable Sweep Rate. 0.5 Hz to 50 Hz. Counter Specifications. Frequency Range (AC coupled): 1 Hz to 100 MHz. Sensitivity: 30 mV RMS from 1 Hz to 50 MHz; 50 mV RMS from 50 MHz to 100 MHz. Period Range/Resolution: 1 ms to 60 s / 1 ms. Frequency Accuracy: ±(time base error + 1 count). Period Accuracy: ±(time base error + 1 count trigger error). LED Display



 

Standard Calibration $450.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX CFG280. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your TEKTRONIX CFG280 CALIBRATION and/or TEKTRONIX CFG280 Function Generator w/Counter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: