TEKTRONIX FG501A CALIBRATION and TEKTRONIX FG501A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX FG501A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   TEKTRONIX FG501A   Description / Specification:    
TEKTRONIX FG501A Function Generator Plug-In

The Tektronix FG 501A provides low-distortion outputs from 0.002 Hz to 2 MHz. It is capable of generating five basic waveforms-sine, square, triangle, ramp, and pulse-at output levels up to 30 V peak-to-peak with up to ± 13 V of offset from a 50-ohm source. Waveform triggering and gating are provided with a variable phase control to permit up to ±90 degrees of phase shift for generating haver-sines, sin pulses, and haver triangles. A step attenuator provides 60 dB of output signal attenuation in 20-dB steps with an additional 20 dB of variable attenuation. Variable symmetry from 5% to 95% provides ramps and pulses. Pulse rise time is <= 25 ns. Audio sine-wave distortion is <= 0.25% and audio amplitude flatness is within 0.1 dB. Frequency Range with var. symmetry: 0.002 to 2 MHz 200 kHz ±10%. Dial Accuracy % of full scale: <=3. Amplitude open circuit: 30 Vpp. Attenuator in 20-dB steps: 0 to -60 dB. Offset open circuit: ±13 V dc. Peak Signal + Offset open circuit: ±15 V dc. Output Impedance: 50 ohms. Amplitude Flatness 10-kHz ref, 50-ohm load): Sine ±0.1 dB, 20 Hz to 20 kHz; ±0.5 dB, 20 kHz to 1 MHz, ±1 dB, 1 MHz to 2 MHz; Triangle ±0.5 dB, 20 Hz to 200 kHz; ±2 dB, 200 kHz to 2 MHz; Square ±5 dB 20 Hz to 2 MHz. Square-Wave Response: <= 2-ns rise/fall; <=3% p-p aberrations.



 

Standard Calibration $450.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX FG501A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your TEKTRONIX FG501A CALIBRATION and/or TEKTRONIX FG501A Function Generator Plug-In REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: