TEKTRONIX FG503 CALIBRATION and TEKTRONIX FG503 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX FG503 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   TEKTRONIX FG503   Description / Specification:    
TEKTRONIX FG503 Function Generator Plug-In

The Tektronix FG 503 Function Generator provides high-quality low-distortion sine, square, and triangle waveforms. Six decade frequency multiple steps, a custom position for user-determined frequency multiplication, a dial calibrated from 1.0 to 30 (uncalibrated from 0.1 to 1.0), and a frequency vernier control work together to select frequencies in overlapping ranges from 1 Hz to 3 MHz. The output frequency can be swept over a 1000:1 ratio by an external voltage. Output amplitude and offset controls are provided. A trigger output is available for controlling external devices or equipment. Amplitude up to 10 V peak-to peak can be developed across a 50-ohmload (20 V peak-to-peak open circuit). Selectable offset up to 3.75 V dc across 50 ohm (7 .5 V dc open circuit) is also featured. Frequency Range with var. symmetry: 1 Hz to 3 MHz (0.01 Hz to 5 MHz usable). Dial Accuracy % of full scale: <=5. Amplitude open circuit: 20 Vpp. Offset open circuit: ±7.5 V dc. Peak Signal + Offset open circuit: ±15 V dc. Output Impedance: 50 ohms. Amplitude Flatness 10-kHz ref, 50-ohm load): Sine ±0.5 dB, 20 Hz to 20 kHz; ±1.5 dB, 0.1 to 3 MHz; Triangle ±1 dB ref to Sine Wave; Square ±1 dB ref to Sine Wave. Square-Wave Response: <= 60-ns rise/fall; <=3% p-p aberrations.



 

Standard Calibration $115.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX FG503. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your TEKTRONIX FG503 CALIBRATION and/or TEKTRONIX FG503 Function Generator Plug-In REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: