TEKTRONIX OF150 REPAIR and TEKTRONIX OF150 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the TEKTRONIX OF150. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX OF150 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   TEKTRONIX OF150   Description / Specification:    
TEKTRONIX OF150 850 nm Fiber Optic TDR

The Tektronix OF150 Fiber Optic TDR is high-performance and easy-to-use. It precisely measures signal loss and breaks on multimode fiber at the 850 nm wavelength. The instrument typically measures reflective breaks through 42.5 dB, and splice loss to ±0.1 dB through 21.5 dB of one-way cable loss, depending on fiber characteristics. Maximum read-out range is 19.9 km, with 1 meter resolution. Data point resolution is 2 cm. Characteristics. Wavelength: 850 nm (±20 nm) (typical). Displayed Pulse Width LONG pulse: 5.5 meters, ±1 meter. Displayed Pulse Width SHORT pulse: 1.5 meters, ±0.3 meter. System Pulse Rate: 4.650 kHz, ±5 Hz. Optical Output Amplitude: >= 25 uW Time-average power coupled into test fiber (50 um core, 0.20 NA) (LONG PULSE mode, slow average). Absolute maximum optical output; Amplitude: 70 uW averaged over time. Displayed Pulse Risetime: <0.7 meters from -20 dB point to -6 dB point. Measurement range; Filtering: Decrease in RMS noise floor. MEDIUM filter: 7.5 dB nominal. SLOW filter: 15 dB nominal. Optical Input Sensitivity: <= 0.40 uW input for 30 dB above displayed RMS noise floor. Dynamic Range: (One Way) 29 dB (Scattering Signal measurements, SNR=1); 42.5 dB (Fiber End Detection assuming 4% Fresnel reflection ). Options. Opt. 01 - XY1 Output Module. Opt. 04 - Chart Recorder.



 

Standard Calibration $640.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX OF150. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your TEKTRONIX OF150 REPAIR and/or TEKTRONIX OF150 850 nm Fiber Optic TDR CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: