A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX P6245 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our
 used Oscilloscope Accessory page

   TEKTRONIX P6245   Description / Specification:    
TEKTRONIX P6245 1.5 GHz, 10X Active FET Probe

The Tektronix P6245 is a 1.5 GHz, 10X active FET probe with less than 1 pF input capacitance. Its low input capacitance and high input resistance minimize circuit loading over a wide bandwidth range. The P6245’s small profile and low-mass head makes probing crowded circuits by hand fast and easy. It is powered through a TEKPROBE interface between the probe’s compensation box and the oscilloscope.

Analog Bandwidth (system): 1 GHz.
DC Attenuation Accuracy (probe only): 10:1 ±2%.
Output Zero: ±5 mV or less at output of probe, ±50 mV or less displayed on screen with TEKPROBE interface.
Rise Time (probe only): 267 ps on ≥10 GHz oscilloscope.

Analog Bandwidth (probe only): 1.5 GHz on ≥10 GHz oscilloscope.
Linear Input Dynamic Range: - 8 V to + 8 V (Equivalent to - 0.8 V to + 0.8 at the output of the probe.)
Linearity: ± 4% or less of dynamic range.
Non-Destructive Input Voltage Range: - 15 V to + 15 V (DC + peak AC).
Input Resistance: 1 MΩ at DC.
Input Capacitance: ≤1.0 pF.
Offset Range: -10 V to +10 V.
DC Offset Drift: 100 uV/°C or less at output of probe.
Delay Time: 5.3 ns ±0.2 ns.


Standard Calibration $45.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX P6245. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your TEKTRONIX P6245 CALIBRATION and/or TEKTRONIX P6245 1.5 GHz, 10X Active FET Probe REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: