NEWPORT 8610.8C CALIBRATION and NEWPORT 8610.8C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NEWPORT 8610.8C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our
 used Laser Diode Controller page

 
   NEWPORT 8610.8C   Description / Specification:    
NEWPORT 8610.8C Combination LDD/TEC Module

The Newport 8610.8C is a 1,000 mA 2A/4V Combination LDD/TEC Module. Specifications. Laser Output; Output Current Range: 0 to 1,000 mA. Output Current Resolution (16-bit): 0.0153 mA. Output Current Accuracy: 0.03 + 30 µA. Compliance Voltage: 3 Volts. Temperature Coefficient (Full Scale): < 50 ppm/°C. Short Term Stability (1 hr., Full Scale): < 10 ppm. Long Term Stability (24 hr., Full Scale): < 50 ppm. Noise/Ripple (rms): < 2 µA. Current Limit; Range: 0 to 1,000 mA. Resolution: 1 mA. Accuracy: ± 2 mA. Internal Function Generator; Waveforms: Sine & square wave. Frequency Range 1: 200 Hz to 2 kHz. Frequency Range 2: 2 kHz to 300 kHz. Squarewave Duty Cycle (± 5%): 50%. Frequency Accuracy: ± 5 %. Amplitude Accuracy: ± 5 %. Sinewave Total Harmonic Distortion: < 2 %. Squarewave risetime: < 500 ns. Photodiode Input; Range: 0 - 5 mA. Stability (Full Scale, 24 hours): ± 0.02 %. Accuracy: 0.004 + 0.5 µA. Measurement Display; Output Current Range: 0 to 1,000.00 mA. Output Current Resolution: 0.01 mA. Output Current Accuracy: 0.02 + 200 µA. Forward Voltage Range: 0.000 to 3.000 Volts. Forward Voltage Resolution: 0.1 mV. Forward Voltage Accuracy: 0.005 + 0.3 mV. Photodiode Current Range: 5 - 5,000 µA. Photodiode Current Resolution: 0.1 µA. Photodiode Current Accuracy: 0.01 + 0.5 µA. PD Resp. Range (µA/mW): 0.00 to 600.00. PD Resp. Resolution (µA/mW): 0.01. Optical Power Range: 0.00 to 1000.00 mW. Optical Power Resolution: 0.01 mW. TEC Output; Maximum Current: 2 Amps. Maximum Voltage: 4 Volts. Typical Power: 8 Watts. Current Limit; Range: 0 to 2 Amps. Accuracy: ± 10 mA.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NEWPORT 8610.8C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Coherence Time
Average time for the wave train to lose its phase realtionships

Fiber Bragg Grating (FBG)
A fiber Bragg grating (FBG) is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. This is achieved by adding a periodic variation to the refractive index of the fiber core, which generates a wavelength specific dielectric mirror. A fiber Bragg grating can therefore be used as an inline optical filter to block certain wavelengths, or as a wavelength-specific reflector.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another. Adding information into pulses of light.

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, such as a fiber optic transmission system, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your NEWPORT 8610.8C CALIBRATION and/or NEWPORT 8610.8C Combination LDD/TEC Module REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: