MPB TECHNOLOGIES EBS-7210 REPAIR and MPB TECHNOLOGIES EBS-7210 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the MPB TECHNOLOGIES EBS-7210. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MPB TECHNOLOGIES EBS-7210 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   MPB TECHNOLOGIES EBS-7210   Description / Specification:    
MPB TECHNOLOGIES EBS-7210 Dual-Band Broadband Source,

The MPB Communications EBS-7210 is a high-power, spectrally-flattened and remarkably stable broadband source spanning both the erbium C and L bands. Developed to be an affordable, yet powerful, laboratory test source for DWDM component manufacturers. With its broad, flattened emission spectrum and eye-safe wavelength, the EBS-7210 Dual-Band Broadband Source is well suited for a wide range of applications, such as wavelength-dependent loss and PMD measurements of DWDM-system components, gain and gain-flatness measurements of EDFAs, local networking by spectral slicing, fiber-optic sensors and white-light interferometry. Specifications. Total Output Power: >= 11 dBm. Spectral Width: >= 76 nm (at 3 dB), 100 nm typ. (at 20 dB). Ripple: <= 2.5 dB over >= 75 nm. Stability (after 30-min warm-up): <= ± 10 mdB/hr (5 mdB/hr typ.). Polarization State: Unpolarized. Optical Isolation (output): >= 42 dB over bandwidth. Output Connector: E-2000 APC. Communication: RS-232 (optional).



 

Standard Calibration $550.00 *
*This is a Web introductory price for one calibration of the MPB TECHNOLOGIES EBS-7210. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your MPB TECHNOLOGIES EBS-7210 REPAIR and/or MPB TECHNOLOGIES EBS-7210 Dual-Band Broadband Source, CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: