ANDO AQ8201-110 REPAIR and ANDO AQ8201-110 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANDO AQ8201-110. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ8201-110 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   ANDO AQ8201-110   Description / Specification:    
ANDO AQ8201-110 WDM DFB-LD Module

The Ando AQ8201-110 WDM DFB-LD Module (Light source) is used with the AQ8201 series, Optical Test and Measurement System. Specifications. Available wavelength range 1524.110 to 1620.500 nm. Wavelength accuracy: Within ±0.01 nm (typ). Wavelength setting resolution: 0.001 nm. Spectral linewidth NARROW: 5 MHz or less. Spectral linewidth WIDE: 50 MHz (typ.) Optical output level: +10 dBm or more. SMSR: 45 dB (typ). Output level stability 15 minutes: Within ±0.005 dB. Output level stability 24 hours: Within ±0.03 dB. Wavelength stability 15 minutes: Within ±0.005 nm. Wavelength stability 24 hours: Within ±0.01 nm. Wavelength range: 1.6 nm or more. Optical attenuation range: 10 dB (0.01dB step). Optical isolation: 55 dB or more. RIN: -145 dB/Hz (typ). Internal modulation: 100 Hz to 300 kHz (CHOP). Applicable fiber: SM (10/125mm). Optical connector: FC/Angled PC. Options. Option 01 (for high output level). Option 02 (for PMF). Option 03 External modulation (for sine waveform). Option 04 External modulation (for CHOP).



 

Standard Calibration $330.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ8201-110. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your ANDO AQ8201-110 REPAIR and/or ANDO AQ8201-110 WDM DFB-LD Module CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: