Keysight (Agilent) 81104A REPAIR and Keysight (Agilent) 81104A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 81104A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 81104A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pulse Generator?
Shop for Comparable Products on our
 used Pulse Generator page or new Pulse Generator page

 
   Keysight (Agilent) 81104A   Description / Specification:    
Keysight (Agilent) 81104A 80 MHz Pulse / Pattern Generator Mainframe

The Agilent 81104A mainframe with the 81105A output module generates all the standard pulses and digital patterns needed to test current logic technologies (CMOS, TTL, LVDS, ECL, etc.). With the optional second channel multi-level and multi-timing signals can be obtained using the internal channel addition feature. Timing values can now be swept without the danger of misleading pulses or dropouts that could cause measurement errors. Specifications. Frequency range: 1 mHz to 80 MHz. Timing resolution: 3.5 digits, 5 ps best case. Period RMS jitter: 0.001% + 15 ps (With PLL), 0.01% + 15 ps (With VCO). Period range: 6.25 ns to (period 6.25 ns). Period range Accuracy: ± 5% ± 250 ps. Jitter (RMS): 0.01% + 15 ps. Add. Variable delay range: 0 ns to (period -12.5). Transition time range (10/90): 3 ns to 200 ms. Linearity: 3% typ. for transitions > 100 ns. Burst Count: 2 to 65536 (single or double pulses). Delay: Delay, phase or % of period. Double pulse delay: Double pulse and delay are mutually exclusive. Duty cycle: Set between 0.1% and 95% (subject to width limits 99.9% with overprogramming). Output connectors: BNC single-ended. Source Impedance: Selectable 50 ohm or 1 k-ohm. Accuracy: Typ. ± 1%. Max. external voltage: ± 24 V. Short circuit current: ± 400 mA max (doubles for channel addition). Base line noise: 10 mV RMS typical, 4 mV RMS typ.. Overshoot /preshoot /ringing: ± 5% of amplitude ± 20 mV.



 

Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 81104A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your Keysight (Agilent) 81104A REPAIR and/or Keysight (Agilent) 81104A 80 MHz Pulse / Pattern Generator Mainframe CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: