ILX LIGHTWAVE LDX-3545 CALIBRATION and ILX LIGHTWAVE LDX-3545 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDX-3545 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our
 used Laser Diode Controller page

 
   ILX LIGHTWAVE LDX-3545   Description / Specification:    
ILX LIGHTWAVE LDX-3545 Precision Current Source

The ILX LDX-3545 Laser Diode Driver provides a low noise, high-stability current output for precise control of laser diodes. Output 1000/3000 mA ranges, 250/750 uA setpoint resolution with +/-0.1% (+/-1/+/-3 mA accuracy (% of fs), compliance voltage 6.5 V max, short term stability (1 hr) <50 ppm/degC, long term stability (24 hr) <50 ppm, noise and ripple (rms) high bandwidth <15/<20 uA, cw mode <8 uA. Current Limit settings 0 to 101.0 and 0 to 3030.0 mA with 10 mA resolution and +/-1% fs. Photodiode feedback type differential, revers bias: 0-5 V adjustable, 5 to 9999 uA, +/-0.02% stability, =/-0.1% setpoint accuracy, power modulation BW: 1 kHz.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDX-3545. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.


Please contact us for your ILX LIGHTWAVE LDX-3545 CALIBRATION and/or ILX LIGHTWAVE LDX-3545 Precision Current Source REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: