JDSU T-BERD 8000 REPAIR and JDSU T-BERD 8000 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the JDSU T-BERD 8000. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU T-BERD 8000 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our  used Lightwave Measurement System page or new Lightwave Measurement System page

 
   JDSU T-BERD 8000 (ETB8000)   Description / Specification:    
JDSU T-BERD 8000 Optical Test Platform

The JDSU T-BERD 8000 is a scalable test platform for next generation high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities. Applications. Enables optical connector inspection and full fiber characterization with OTDR, IL, ORL, CD, PMD and AP. Tests and troubleshoot WDM systems and ROADM networks with Optical Spectrum Analyzers. Tests and troubleshoots converged Ethernet/IP networks at 10 Mbps to 100 Gpbs interfaces and captures and analyzes packets. Tests Layer 1-3 Ethernet/IP SLAs with an automated, enhanced RFC 2544/SAM Complete per ITU-T Y.1564. Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64, including service disruption measurements and path overhead (POH) capture with triggers. Measures PMD on live traffic and tests in-band OSNR in DWDM/ROADM systems with In-Service PMD. Enables installation and maintenance of OTN networks up to 11.1 Gbps and OTU4 with full 100 Gpbs client . Supports 1/2/4/8/10 Gpbs FC for installation and maintenance of SANs and low-latency circuits. Key Features. 10.4 inch high-visibility touch screen display. High-speed PowerPC processor, rugged SATA solid-state hard disk and latest high-capacity Li Ion battery technologies. 1G Ethernet, Wireless connectivity (3G, Wifi, Bluetooth) and four USB interfaces. Built-in optical options including power meter, VFL and talk set. Automated connector inspection with IEC pass/fail analysis. Compatible with T-BERD/MTS-6000 test modules. Base instrument options. E8100, Receptacle for two plug-In modules. E80HVCoI, High visibility TFT color display. E80HVTCol, High visibility touchscreen TFT color display. E80Hdisk, Hard disk drive. E80FD, Extractable floppy disk drive. E80CDRW, Extractable R/W CD-ROM drive. E80MDM, Built-in PSTN modem. E80VFL, VFL with UPP connector. E80TS, Optical talk set. E80PM, Optical power meter with UPP connector (2.5 mm provided as standard). E8036LTSTS, Optical loss test set with talk set 1310/1550/1625 nm.



 

Functional Test $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU T-BERD 8000. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your JDSU T-BERD 8000 REPAIR and/or JDSU T-BERD 8000 Optical Test Platform CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: