Keysight (Agilent) 86062C REPAIR and Keysight (Agilent) 86062C CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 86062C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86062C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Switch?
Shop for Comparable Products on our
 used Optical Switch page

 
   Keysight (Agilent) 86062C   Description / Specification:   Spec Sheet 
Keysight (Agilent) 86062C Full-Size Lightwave Switch

The Agilet 86062C is a Full-Size Lightwave Switch. Specifications. Insertion Loss: Single-mode Switches, 1.0 dB; Multi-mode Switches, 0.8 dB. Repeatability: Sequential Switching, ±0.008 dB; Random Switching, ±0.025 dB. Isolation: -80 dB. Number of Input Channels: Option 001 Single input channel, Option 002 Two input channels. Wavelength and Fiber Type: Option109 1280 -1650 nm, 9/125 µm single-mode fiber; Option 163 830 -1350 nm, 62.5/125 µm multimode fiber; Option H51 830 -1350 nm, 50/125 µm multimode fiber (special order). Port Type: Option 050 Connectors on front panel (with Option 204 only); Option 051 Connectors on rear panel (for connectorized outputs only); Option 052 3 meter fiber out the rear panel (for connectorized outputs, connector is at the end of the 3 meter fiber). Output Channels: 20, 24, 28, 32, 40, 48, 56, 64, 72, 80, 100.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86062C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your Keysight (Agilent) 86062C REPAIR and/or Keysight (Agilent) 86062C Full-Size Lightwave Switch CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: