ADVANTEST R3172 CALIBRATION and ADVANTEST R3172 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ADVANTEST R3172 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ADVANTEST R3172   Description / Specification:    
ADVANTEST R3172 26.5 GHz Spectrum Analyzer

The Advantest R3172 is a high performance analyzer with an average display noise level of -104 dBm/RBW 1 kHz at 26.5-GHz. This enables a wider relative measurement range when measuring high frequencies or weak signals against a reference waveform. The R3172 also provides high performance with SSB phase noise of -91 dBc/Hz @26.5 GHz/20 kHz offset by providing an internal local transmitter with a high level of purity. A variety of optional external mixers are available for the R3172 spectrum analyzer for measuring various high-frequency signals. By selecting the optimum option, the measurement frequency can be set from 26.5 GHz to 110 GHz. Since the frequency characteristics specific to each mixer are corrected and the data is saved in the internal memory of R3172, the level can be read directly. The R3172 is equipped with a 6-dB bandwidth filter of 9 kHz/120 kHz/1 MHz and a QP detector. In addition, an optical 200-Hz narrow band-pass filter is available, enabling noise measurement of high frequency bands that will be increasingly in demand in the future. Specifications. Frequency range: 9 kHz to 26.5 GHz. Frequency readout accuracy (Start, Stop, CF, Marker): ±(Frequency readout × frequency reference error + span × span accuracy + RBW × 0.15 + 60Hz). Frequency span Range: 1 kHz to 26.5 GHz, 0 Hz (zero span). Frequency span Accuracy: <= ± 1%. Resolution bandwidth At 3 dB Range: 1 kHz to 3 MHz 1-3-10 sequence. Measurement range Preamplifier OFF (Input attenuator >= 10 dB): +30dBm, 0 VDC max. Sweep time: 20 ms to 1000 s. Options. OPT.03, Local output for external mixers. OPT.20, Highly stable frequency reference. OPT.27, Narrow band resolution bandwidth of 30/100/300 Hz and 200 Hz (EMI bandwidth). OPT.29, 50µs high-speed time domain sweep. OPT.73, Wide-range FM demodulation. OPT.74, 3-GHz tracking generator. OPT.16, External mixer 26.5 to 40 GHz. OPT.17, External mixer 40 to 60 GHz. OPT.18, External mixer 50 to 75 GHz. OPT.19, External mixer 75 to 110 GHz.



 

Standard Calibration $570.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ADVANTEST R3172. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.


Please contact us for your ADVANTEST R3172 CALIBRATION and/or ADVANTEST R3172 26.5 GHz Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: