Keysight (Agilent) 83402B CALIBRATION and Keysight (Agilent) 83402B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 83402B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our
 used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   Keysight (Agilent) 83402B   Description / Specification:   Spec Sheet 
Keysight (Agilent) 83402B 1308 nm Lightwave Source Module with Isolator

The Agilent 83402B Lightwave Source Module with isolator is a laser diode source that is intended to be amplitude modulated for making frequency domain measurements of the modulation characteristics of lightwave componants. Specifications. Wavelength: 1308 ± 20 nm. RMS Spectral Widths: = 3 nm. Average Power (typical): 1.3 mW/0.75 mW. Responsivity at 50 MHz (nominal): 0.022 W/A / 0.011 mW, -33 dB/-39 dB. Modulation Frequency Range: 300 kHz to 6 GHz. Modulation Frequency Response, Uncorrected: ±5.0 dB. Power Stability, per 1000 h: 0.6% typical. Center Wavelength Temperature Coefficient: 0.5 nm/° C typical. Maximum Laser Chip Temperature Change: ±0.1° C typical. Center Wavelength Stability at 25° C: < 0.3 %/year typical. Compatible Fiber: 9/125 um fiber, Average Power: 1.25 ± 0.75 mW. Can be modulated by an external signal up to +14 dBm (maximum)RF power. DC power input: -12.6V supply is > -15V; +15V supply is < +17V. Options. Opt 011, Diamond HMS-10. Opt 012, FC/PC. Opt 013, DIN 47256. Opt 014, ST.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 83402B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.


Please contact us for your Keysight (Agilent) 83402B CALIBRATION and/or Keysight (Agilent) 83402B 1308 nm Lightwave Source Module with Isolator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: