ANRITSU MP1590A CALIBRATION and ANRITSU MP1590A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MP1590A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   ANRITSU MP1590A   Description / Specification:    
ANRITSU MP1590A Network Performance Tester

The Anritsu MP1590A Network Performance Tester is a measuring instrument capable of testing PDH, DSn, SDH/SONET and OTN equipment as well as making jitter measurements with only one unit. It supports the following electrical and optical interfaces. Electrical interfaces: PDH (2.048, 8.448, 34.368, 139.264 Mbit/s), DSn (1.544, 44.736 Mbit/s), STM-0/1/64, STS1/3/192 (51.84, 155.52, 9953.28 Mbit/s), OTU-2 (10.71 Gbit/s) Optical interfaces: STM-0/1/4/16/64, OC-1/3/12/48/192 (51.84, 155.52, 622.08, 2488.32, 9953.28 Mbit/s), OTU-1 (2.66 Gbit/s), OTU-2 (10.71 Gbit/s). Error analysis (error performance): measurements conforming to ITU-T Rec. G.821/G.826/G.828/G.829, M.2100/M.2101/M.2110/M.2120 and Telcordia GR-820 can be performed. SOH/TOH and POH within an SDH/SONET frame can be set and transmitted. Real-time monitoring is supported for K1/K2 bytes within SOH/TOH, K3/K4 bytes within POH, AU/STS pointer, TU/VT pointer, path trace and N1/Z5, N2 of the received signal. Installing a 10/10.7G jitter unit enables SDH/SONET (52 to 9953 MHz), OTU-1 (2.66 GHz), OTU-2 (10.71 GHz) and 10.3 GHz jitter generation/measurement.



 

Standard Calibration $930.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MP1590A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your ANRITSU MP1590A CALIBRATION and/or ANRITSU MP1590A Network Performance Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: